How to terminate Rg11 coaxial cable?

Jun 19, 2025

As a supplier of Rg11 coaxial cable, I've encountered numerous inquiries regarding the proper termination of this essential cable. Terminating an Rg11 coaxial cable correctly is crucial for ensuring optimal signal transmission and preventing signal loss. In this blog post, I'll walk you through the step - by - step process of terminating an Rg11 coaxial cable, providing you with the knowledge and confidence to handle this task effectively.

Understanding Rg11 Coaxial Cable

Before we delve into the termination process, it's important to understand what Rg11 coaxial cable is. Rg11 is a type of coaxial cable that is commonly used for long - distance cable television (CATV) and broadband internet connections. It has a larger diameter compared to other coaxial cables such as Rg59 Coaxial Cable and Rg6 Coaxial Cable, which allows it to carry signals over longer distances with less signal loss. The cable consists of a central conductor, an insulating layer, a metallic shield, and an outer jacket.

Tools and Materials Needed

To terminate an Rg11 coaxial cable, you'll need the following tools and materials:

  1. Coaxial Cable Strippers: These are specifically designed to strip the outer jacket, insulation, and shield of the coaxial cable without damaging the central conductor.
  2. Crimping Tool: A good quality crimping tool is essential for attaching connectors to the cable.
  3. Rg11 Coaxial Connectors: Make sure to choose connectors that are compatible with Rg11 cable.
  4. Wire Cutters: For trimming the cable to the appropriate length.
  5. Safety Glasses: To protect your eyes from any flying debris.

Step - by - Step Termination Process

Step 1: Prepare the Cable

First, measure and cut the Rg11 coaxial cable to the desired length using wire cutters. Make sure to leave some extra length to account for any mistakes during the termination process. Put on your safety glasses to protect your eyes.

Step 2: Strip the Cable

Use the coaxial cable strippers to remove the outer jacket of the cable. Typically, you'll want to strip about 1 - 1.5 inches of the outer jacket. Be careful not to cut into the metallic shield beneath the jacket. Next, strip the insulation from the central conductor, leaving about 0.25 - 0.5 inches of the conductor exposed.

Step 3: Remove the Shield

After stripping the outer jacket, you'll see the metallic shield. Carefully fold back the shield so that it is flush with the end of the outer jacket. Some shields may be braided, while others may be a solid foil. Make sure the shield is evenly distributed around the cable.

Step 4: Attach the Connector

Take the Rg11 coaxial connector and slide it onto the cable. The connector should fit snugly over the outer jacket and the shield. Make sure the central conductor of the cable fits into the center pin of the connector.

Step 5: Crimp the Connector

Once the connector is properly positioned on the cable, use the crimping tool to crimp the connector onto the cable. Apply firm and even pressure to the crimping tool to ensure a secure connection. You should hear a distinct "click" sound when the crimp is complete.

Step 6: Inspect the Connection

After crimping, inspect the connection to make sure it is secure. Check that the central conductor is properly seated in the center pin of the connector and that the shield is in contact with the outer part of the connector. There should be no visible gaps or loose parts.

Step 7: Repeat for the Other End

If you need to terminate both ends of the cable, repeat steps 2 - 6 for the other end of the Rg11 coaxial cable.

Troubleshooting

Even with careful termination, you may encounter some issues. Here are some common problems and their solutions:

  • Signal Loss: If you experience signal loss after terminating the cable, check the connection of the central conductor and the shield. Make sure the connector is properly crimped and that there are no breaks in the cable.
  • Interference: Interference can be caused by a loose shield or a damaged cable. Inspect the shield to ensure it is properly grounded and that there are no holes or tears in the outer jacket.
  • Poor Connection: If the connector is not making a good connection, it may be because the crimp was not done correctly. Try re - crimping the connector or using a different connector.

Best Practices for Termination

  1. Keep the Work Area Clean: A clean work area reduces the risk of contamination and ensures a better connection.
  2. Follow Manufacturer's Instructions: Always follow the instructions provided by the manufacturer of the connectors and tools.
  3. Test the Connection: After terminating the cable, test the connection using a signal tester to ensure that the cable is functioning properly.

Comparison with Other Coaxial Cables

As mentioned earlier, Rg11 coaxial cable is different from Rg59 Coaxial Cable and Rg6 Coaxial Cable. Rg59 is typically used for shorter runs and lower - frequency applications, while Rg6 is more commonly used for modern cable TV and internet installations. Rg11, on the other hand, is ideal for long - distance applications where signal loss is a concern.

RG 6 coaxial cableRG59 coaxial cable

Conclusion

Terminating an Rg11 coaxial cable is not a difficult task if you have the right tools and follow the proper steps. By taking the time to terminate the cable correctly, you can ensure that your Coaxial Wire system operates at its best, providing you with reliable signal transmission over long distances.

If you're in the market for high - quality Rg11 coaxial cable or have any questions about cable termination, feel free to reach out to us. We're here to help you with all your coaxial cable needs and can provide you with expert advice on installation and termination. Contact us to start a procurement discussion and find the best solutions for your projects.

References

  1. "Coaxial Cable Installation Guide", General Cable Corporation
  2. "Rg11 Coaxial Cable Specifications", Belden Inc.