Requirements For The Number Of Times The Power Cord Is Bent

The core of the power cord is oxygen-free copper, and the outside is covered with a layer of rubber. The bending resistance of the metal is limited. When bending at the same position repeatedly, the bending once becomes sharp lines, and the bending phenomenon becomes a large crack, which eventually leads to the fracture phenomenon.
The core of the power cord is oxygen-free copper, and the outside is covered with a layer of rubber. The bending resistance of the metal is limited. When bending at the same position repeatedly, the bending once becomes sharp lines, and the bending phenomenon becomes a large crack, which eventually leads to the fracture phenomenon.
We have used a lot of power cords, mostly because of core wire problems. If the manufacturer can produce a durable metal wire, the life of the power cord will be greatly extended. Of course, this is just hope. Basically, the core wire of the plug-in wire can pass the 10,000-bending test, as long as it is not too excessive or can be used for a long time.

More information about power cords is in Aoliheng. Jiaxing Aoliheng Cable Co., Ltd. has been specializing in the production of safety certified power cords for 11 years. The products are in compliance with vde, ccc, ul, csa, saa, pse, sev, kema-keur, Brazil, Argentina, British bs, big Safety certification in more than a dozen countries including South Africa. Products are widely used in computers, audio, kitchen utensils, copiers, air conditioners and other electrical appliances.