Power Cord Process Flow
Feb 15, 2024
Most products such as power cords are sold based on quantity, so basically a lot of power cords are produced on the production line every day, and because there are differences between different standard wires, the production strength of the manufacturer is Generally speaking, the requirements are very high. Today we will take a brief look at the process flow of domestic power cords. Generally speaking, our wire production is divided into several main parts, namely drawing, annealing, twisting, and extrusion. Remember the steps of forming the line, installing armor, adding protective covers, etc. Because I am not a professional production expert, I will only briefly introduce each process and the purpose of each process. As for the specific operations, etc., I still have to wait for the industry The expert came to introduce it.
1. Wire drawing, the main components of power cord wire are copper core or aluminum core, and insulation layer. Wire drawing, as the name implies, is to use a wire drawing machine to reduce the cross section of the wire and increase its length at room temperature. Generally speaking, wire drawing is The primary process.
2. The main purpose of annealing is to enhance the toughness of the monofilament and reduce the strength of the monofilament, so as to meet the various requirements of the wire for the conductive core.
3. The main purpose of the so-called twisting is to enhance the flexibility of the wire for future use. The twisting is a relatively complex process among all processes, and the requirements are higher than other processes.
4. Insulation actually means putting a layer of insulator on the outer layer of the power cord. Of course, the specific manufacturing process cannot be solved by such a simple sentence, and I have already said it in the previous article. Well, the insulation layer of a good power cord is also very particular, and it is also one of the criteria for evaluating whether the wire is of high quality. Therefore, the seemingly simple process actually took a lot of effort.
5. The forming of power cords is a relatively important process. For multi-core power cords, in order to ensure molding and reduce the shape of the power cord, it is generally necessary to twist them into a circle. The mechanism of stranding is similar to that of conductor twisting. Because the pitch diameter of the twisting is large, most methods without back twisting are used. The technical requirements for cabling: first, to prevent the abnormally shaped insulated core from turning over and causing the cable to twist; second, to prevent the insulation layer from being scratched.
7. The power line armor is laid on the underground power line and can withstand a certain positive pressure effect during work. The inner steel belt armor structure can be selected. The power cord is laid in a place with both positive pressure and tension effects (such as water, vertical shafts or soil with a large drop), and the selector should have an internal steel wire armored structure.
8. The processing of the protective cover is a very important step, because this step is directly related to the safety of the power cord. In many cases, the protective cover of the power cord must have many properties before it can be used, in order to prevent the damage of the protective layer from causing leakage, thus Raising safety issues, the protective layer of general wires can be moisture-proof, waterproof, flame-retardant, etc.
The above is a brief introduction to the production process of power cords. With the development of power cord manufacturing companies today, they have been unable to connect. Producing different power cords according to different standards and ensuring quality are very important for every manufacturer. A challenge. In future development, I believe that only power cords with better quality and more competitive prices can win the market.





